PPM Calculator — Parts Per Million Converter
Convert any concentration between parts per million (ppm), parts per billion (ppb), parts per trillion (ppt), percent, per mille, mg/kg, mg/L, μg/L and ng/L — select your source unit and enter the value.
From unit
1 ppm = 1 mg/kg = 1 mg/L (dilute aqueous) = 0.0001 %
- 1
Dimensionless fraction
1 × 0,000001 = 0,000001Multiply the input value by the unit factor to get the pure dimensionless ratio. - 2
Parts per million
0,000001 ÷ 0,000001 = 1Divide by the ppm factor (10⁻⁶) to express the fraction as parts per million.
Jak działa ten kalkulator?
1 ppm = 10⁻⁶ = 1 mg/kg = 1 mg/L (dilute aqueous) = 0.0001% = 1,000 ppb = 1,000,000 ppt. Select your source unit, enter the value, and get all equivalent concentrations at once.
Wzór
How this is calculated
Parts per million (ppm) expresses a dimensionless ratio: one part of a substance in one million parts of the whole. It is identical to mg/kg for mass-based measurements, and to mg/L for dilute aqueous solutions where one litre of water weighs approximately one kilogram. This equivalence is exact enough for most water-quality and environmental work, but breaks down for dense liquids, gases at non-standard conditions, or very high concentrations.
Conversion is straightforward: each unit represents a power-of-ten multiple of the underlying dimensionless fraction. 1 ppm = 1 × 10⁻⁶; 1 ppb = 1 × 10⁻⁹; 1 ppt = 1 × 10⁻¹²; 1 % = 1 × 10⁻²; 1 ‰ = 1 × 10⁻³. The calculator converts your input to the fraction first, then to every target unit. For gas-phase concentrations, ppm can also be expressed as ppmv (parts per million by volume), which follows the same arithmetic but has a different physical meaning from mass-based ppm — this calculator handles mass-fraction conversions only.
Practical reference points: drinking-water fluoride limits are around 0.7–1.5 ppm; lead limits are often 10–15 ppb; atmospheric CO₂ is about 420 ppm; and 1% alcohol in a beverage equals 10,000 ppm by mass.
Najczęściej zadawane pytania
For dilute aqueous solutions — the vast majority of environmental, water-quality and food-safety uses — yes. One litre of water at standard conditions weighs approximately one kilogram, so 1 mg/L ≈ 1 mg/kg = 1 ppm. The approximation holds to better than 0.1% up to about 10,000 ppm. At higher concentrations or for non-water liquids, use the actual solution density to convert exactly.
ppmv is parts per million by volume (often used for gas mixtures, e.g. atmospheric CO₂), while ppmm is parts per million by mass. For ideal gases the two coincide only if the molecular weights are equal. This calculator converts mass-fraction concentrations; for gas-phase ppmv conversions you also need the molecular weights of the gas and the mixture.
Divide by 10,000. For example, 500 ppm = 500 / 10,000 = 0.05%. Equivalently, multiply by 0.0001. Going the other way: 1% = 10,000 ppm.
Znany również jako
TG we-Calculate Editorial Team. (2026). PPM Calculator — Parts Per Million Converter [Online calculator]. TG we-Calculate. https://we-calculate.com/pl/calculator/ppm-calculator
TG we-Calculate Editorial Team. "PPM Calculator — Parts Per Million Converter." TG we-Calculate. 2026. https://we-calculate.com/pl/calculator/ppm-calculator.
TG we-Calculate Editorial Team, "PPM Calculator — Parts Per Million Converter," TG we-Calculate, 2026. [Online]. Available: https://we-calculate.com/pl/calculator/ppm-calculator
@misc{wecalculate_ppm_calculator, title = {PPM Calculator — Parts Per Million Converter}, author = {{TG we-Calculate Editorial Team}}, howpublished = {\url{https://we-calculate.com/pl/calculator/ppm-calculator}}, year = {2026}, note = {TG we-Calculate} }
Czy ten kalkulator Ci pomógł?