Intermediate

Post-Void Residual (PVR) Calculator

Enter the residual urine volume from a bladder scan (ultrasound or catheter) and the volume voided just before. The calculator shows the residual fraction, estimated total bladder capacity, and the standard clinical severity category.

mL

Volume of urine left in the bladder after voiding, measured by ultrasound or catheter

mL

Volume urinated during the void immediately before the PVR measurement
Post-Void Residual
40mL

Normal — bladder empties effectively

Voided volume
300 mL
Estimated bladder capacity
340 mL
Residual fraction
11,8 %
PVR clinical interpretation (mL): Normal (<50 mL)
Step by step
  1. 1

    Estimated bladder capacity

    40 + 300 = 340
  2. 2

    Residual fraction

    40 ÷ 340 × 100 = 11,8
    Percentage of estimated bladder capacity that remained after voiding.
Resultaten zijn schattingen die uitsluitend dienen ter algemene informatie en vormen geen professioneel advies — controleer belangrijke resultaten altijd zelf voordat je erop vertrouwt. Dit is geen medisch, gezondheids- of fitnessadvies; raadpleeg een gekwalificeerde zorgverlener. Lees de volledige disclaimer.
Snel antwoord

Hoe werkt deze rekenmachine?

Post-void residual (PVR) is the urine left after voiding, measured by bladder scan or catheter. Less than 50 mL is normal; 50–100 mL borderline; 100–200 mL elevated; over 200 mL is significant retention. Residual fraction = PVR ÷ (PVR + voided volume) × 100. Always confirm with a clinician.

Formule
Residual % = PVR ÷ (PVR + Voided volume) × 100 • Capacity ≈ PVR + Voided volume
How this is calculated

Post-void residual (PVR) measures how much urine remains in the bladder after a person voids. It is commonly measured non-invasively by bladder ultrasound (a "bladder scan") within a few minutes of urination, or precisely by straight catheterisation. The volume voided is recorded from the same void to allow a residual fraction to be calculated.

The calculator estimates total functional bladder capacity as the sum of the voided volume and the residual, then expresses the PVR as a percentage of that capacity. The widely cited clinical thresholds are: under 50 mL normal; 50–100 mL borderline (a repeat measurement is usually recommended); 100–200 mL elevated (further evaluation is warranted); above 200 mL significant retention requiring prompt clinical attention.

These thresholds are general guidelines used in urology and continence practice — the 2020 AUA/SUFU guidelines, for example, cite 300 mL as a red-flag level. Clinical context matters: a single elevated reading may reflect anxiety, recent catheterisation, or diuretics. Two consistently elevated measurements are more clinically significant. Always confirm the interpretation with a qualified clinician.

Veelgestelde vragen

A PVR below 50 mL is generally considered normal. Values between 50 and 100 mL are borderline and often warrant a repeat scan; above 100 mL is considered elevated and above 200 mL is clinically significant retention requiring evaluation.

The most common method is a portable ultrasound bladder scanner, which is non-invasive and can be done at the bedside. For greater accuracy, the residual can be measured by inserting a catheter immediately after voiding and draining the remaining urine.

Yes. PVR can vary considerably depending on fluid intake, position, anxiety, medications (especially anticholinergics or alpha-blockers), and time since last void. Clinical guidelines generally recommend two or more consistent readings before diagnosing chronic urinary retention.

Ook bekend als

post void residual calculator
bladder residual urine calculator
urinary retention calculator
bladder scan interpretation
pvr urine volume
bladder emptying percentage
residual urine bladder capacity

APA

TG we-Calculate Editorial Team. (2026). Post-Void Residual (PVR) Calculator [Online calculator]. TG we-Calculate. https://we-calculate.com/nl/calculator/pvr-calculator

Chicago

TG we-Calculate Editorial Team. "Post-Void Residual (PVR) Calculator." TG we-Calculate. 2026. https://we-calculate.com/nl/calculator/pvr-calculator.

IEEE

TG we-Calculate Editorial Team, "Post-Void Residual (PVR) Calculator," TG we-Calculate, 2026. [Online]. Available: https://we-calculate.com/nl/calculator/pvr-calculator

BibTeX

@misc{wecalculate_pvr_calculator, title = {Post-Void Residual (PVR) Calculator}, author = {{TG we-Calculate Editorial Team}}, howpublished = {\url{https://we-calculate.com/nl/calculator/pvr-calculator}}, year = {2026}, note = {TG we-Calculate} }

Heeft deze rekenmachine je geholpen?